accessories

 

To support precision measurements, we supply a set of accessories that enable our customers to get the most out of their test gear. Please consult the data sheets regarding all technical details of these products.

 

 

LEC1-4-1.0: Low EMF Cable, 1m

 

The LEC1-4-1.0 cable is a low-EMF (electromotive force) cable for low-voltage (SELV), precision measurements where low thermoelectric voltages are key. It is a 1m long 4-wire twisted, shielded PTFE cable with gold-plated, crimped copper spades. Twisted shielded cable reduces the impact of electrical noise on the measurement. PTFE as insulation material reduces leakage currents, which is especially important for high-ohms or low current  measurements. Although the cable is rated for a much higher voltage, due to its intended use and non-insulated spades we specify this cable for SELFV (Safety Extra Low Voltage) voltages up to 42V peak.

 

For forther details refer to the data sheet below.

LEC1-4-1.0:

Order Code:            LEC1-4-1.0

Price net/gross:      48.00€ / 57.12€

Other lentgth are available on request. Please contact us.

Gross price includes 19% VAT.

 

Download
DatasheetLEC1_V1_Nov16.pdf
Adobe Acrobat Dokument 92.6 KB

LEC1-4-S: Low EMF Cable Set, 3m

 

The LEC1-4-S cable set is a Low-EMF (electromotive force) solution to build your own customized precision cables for use in low-voltage, precision measurements where low thermoelectric voltages are key. It consists of 20 gold-plated copper spades and 3m of 4-wire twisted and shielded PTFE cable, and shrink tubes, allowing to produce e.g. up to 2 cables with 1.5m length each. Twisted shielded cable reduces the impact of electrical noise on the measurement. PTFE reduces leakage currents, which is especially important for high-ohms measurements. Both crimping or soldering is possible, but crimping is recommended.

 

For forther details refer to data sheet below.

LEC1-4-S:

Order Code:           LEC1-4-S

Price net/gross:     47.00€ / 55.93€

Gross price includes 19% VAT.

 

Download
DatasheetLEC1_V1_Nov16.pdf
Adobe Acrobat Dokument 92.6 KB

LSP1-20: Low EMF Spade Set

 

The LSP1-20 is a set of 20 low-EMF (electromotive force)  gold-plated Copper spades for low-voltage (SELV), precision measurements where low thermoelectric voltages are key. It comes with black and red shrink tubes for the insulation of the spade ends. The spades are intended for soldering or preferably crimping. They have two captive teeth to facilitate attachment of spades to binding posts. For further details see data sheets above, also covering this spade.

 

LSP1-20:

Order Code:            LSP1-20

Price net/gross:      37.00 € / 44.03 €

For higher quantities, please contact us.

Gross price includes 19% VAT.

LBP1-20: Low EMF Banana Plug Set

 

The LBP1-20 is a set of 20 low-EMF (electromotive force)  gold-plated Copper-Beryllium banana plugs for low-voltage, precision measurements where low thermoelectric voltages are key. It comes with black and red shrink tubes for the insulation of the plug ends. The plugs are stackable, if the shrink tube is applied properly. The bananas are intended for soldering. They are intended to fabricate SELV (Safety Extra Low Voltage) cables. For mixed cables combine them with the spades above to build cables with banana and spade ends.

 

LBP1-20:

Order Code:            LBP1-20

Price net/gross:      35.00 € / 41.65 €

For higher quantities, please contact us.

Gross price includes 19% VAT.

CBL1-4-5: Low Noise Twisted Shielded Cable

 

The CBL1-4-5 is a 5m long piece of 4-wire twisted, shielded cable intended for low-voltage, precision measurements where good shielding and high insulation resistance are key. The 4 AWG18 wires are silver plated and come with a PTFE insulation. For further details see data sheets above, also covering this cable. PTFE reduces leakage currents, which is especially important for high-ohms or low current measurements. The tin plated outer shield is woven and therefore has a very good shielding coverage. The outer insulation is also PTFE.

 

CBL1-4-5:

Order Code:            CBL1-4-5

Price net/gross:      22.00 € / 26.18 €

For higher quantities, please contact us.

Gross price includes 19% VAT.

CBL2-2-7: Low Noise Twisted Shielded Cable

 

The CBL2-2-7 is a 7m long piece of 2-wire twisted, shielded cable intended for low-voltage, precision measurements where good shielding and high insulation resistance are key. The 2 AWG20 wires are tin plated and come with a crosslinked ETFE insulation. ETFE is a mechanically strong cable insulation material with only slightly less insulation resistance than PTFE, thus also minimizing leakage currents, which is e.g. important for high ohms measurements. The tin plated outer shield is woven and therefore has a very good shielding coverage. The outer insulation is also crosslinked ETFE,

 

CBL2-2-7:

Order Code:            CBL1-2-7

Price net/gross:      21.00 € / 24.99 €

For higher quantities, please contact us.

Gross price includes 19% VAT.

CBLF-1: 4-Wire Test Cable with Fischer Connector - e.g. for Solartron 7081 + 7071

 

The CBL1-F is a 1m long test cable using a 4-wire twisted, shielded cable together with a 5 pin Fischer connector, as e.g. used on the Solartron 7081 and 7071 precision DMMs. It is intended for low-voltage (SELV voltages only!), precision measurements where good shielding and high insulation resistance are key. The 4 AWG18 wires are silver plated and come with a PTFE insulation, thus also minimizing leakage currents, which is e.g. important for high ohms measurements. The tin plated outer shield is woven and thus has a very good shielding coverage and is connected to the Guard terminal.

 

CBLF-1:

Order Code:            CBLF-1

Price net/gross:      195.00 € / 232.05 €

For higher quantities, please contact us.

Gross price includes 19% VAT.

Note:

All cables and cable accessories above are intended for the precision measurement of low voltages and are only specified for the use with SELV voltage levels. The special requirements of precision measurements, such as e.g. the use of copper spades, do not permit insulation against higher voltages.

SELV means Safety Extra Low Voltage; usually defined to be maximum  42V peak. These voltages, when in contact to the human body, are defined by regulatory standards as causing no harm. Local regulations may define slightly different voltage levels for SELV. Please review your local regulations.

The use of all products listed above with higher voltage levels than SELV is strictly prohibited!